The performance goals of 5G are high data rates, reduced latency,energy savings, cost reduction, increased system capacity, and large-scaledevice connections.The connector is a key basic component in the 5G system. Itreceives a signal from one place and then transmits it to another. The most ideal connector can minimize the loss or distortion of the signal.
5G的效能目標是高資料速率、減少延遲、節省能源、降低成本、提高系統容量和大規模裝置連接。連接器是5G系統中關鍵的基礎元件，從一處接收訊號再傳至另一處，而最理想的連接器則是能使訊號的損耗或失真減至最小。
RF terminators are used to absorb energy and prevent RF signals reflect back from open ends or unused ports.RF terminations are available with RF impedance of 50 Ohm and 75 Ohm.
RF終端器使用於吸收能量並防止RF訊號從開放端或未使用的連接埠反射回來。RF終端器的阻抗分別為 50 歐姆和 75 歐姆。
1.0 mm connectors, also known as W series, because they cover the W-band frequency. They are designed to provide the connector performance up to 110 GHz. The 1.0mm connectors have an M4xP0.7 threads. This connector is widely utilized in applications requiring high performance and reliable signal transmission in a small form factor.
Applications: The 1.0mm connectors are used in a wide range of applications including Military, Medical equipment, Aerospace, SATCOM, Test & Measurement etc.
1.0 mm 連接器，也稱為 W 型連接器，因為它們覆蓋 W 頻段頻率。其被設計出來能夠應用到高達110GHz的頻率。1.0mm連接器具有 M4xP0.7 螺紋。此連接器廣泛應用於需要高效能和小尺寸可靠訊號傳輸的應用。
應用：1.0mm 連接器應用廣泛，包括軍事、醫療設備、航空航太、衛星通訊、測試與測量等。
1.85 mm connectors, also known as V series, because they cover the V-band frequency. They are designed to provide the connector performance up to 67 GHz. The 1.85mm connectors have an M7xP0.75 threads and are mechanically compatible with 2.4 mm connectors. The design was introduced as an open standard under the IEEE 287 Precision Connector Standards Committee.
Applications: The 1.85mm connectors are used in a wide range of applications including Military, Aerospace, SATCOM, Test & Measurement etc.
1.85 mm 連接器，也稱為 V型連接器，因為它們覆蓋V 頻段頻率。其被設計出來能夠應用到高達67GHz的頻率。1.85mm連接器具有 M7xP0.75 螺紋，在機械上與 2.4mm連接器相容。該設計作為 IEEE 287 精密連接器標準委員會的開放標準推出。
應用 : 1.85mm 連接器應用廣泛，包括軍事、航空航太、衛星通訊、測試與測量等
2.4mm connectors are designed to provide the connector performance up to 50GHz. The 2.4mm connectors have an M7xP0.75 threads and are mechanically compatible with 1.85mm connectors.
Applications: The 2.4mm connectors are suitable for high frequency applications such as radar and microwave communications.
2.4mm 連接器，其被設計出來能夠應用到高達50GHz的頻率。2.4mm連接器具有 M7xP0.75螺紋，在機械上與 1.85mm連接器相容。
應用 : 2.4mm 連接器適用於雷達和微波通訊等高頻應用。
2.92 mm connectors, also known as K series, SMK or K type, are designed to provide the connector performance up to 40 GHz .The 2.92 mm male connector is designed with a shorter center contact in order to prevent the damage happened while mating. The 2.92 mm connectors are also inter-mate compatible with SMA and 3.5 mm coaxial connectors.
Applications: Mainly used in high-frequency radio frequency fields, such as microwave communications, satellite communications, high-frequency test and measurement systems, and other fields with higher performance requirements.
2.92 mm 連接器，也稱為 K型連接器、K系列、SMK連接器，其被設計出來能夠應用到高達40GHz的頻率。2.92 mm 的公連接器(male/plug) 在設計上具有較短的中心觸點，主要為了防止在適配時造成損壞。2.92 mm連接器也與 SMA 和 3.5mm同軸連接器相互相容。
應用 : 高頻射頻領域，如微波通訊、衛星通訊、高頻測試與量測系統、以及性能需求較高的領域。
The 3.5 mm connector, which utilizes air dielectric for higher frequency is a precision connector known for its durability. Its design strategy focused on highly-rugged physical interfaces. This coaxial connector achieves mode free operation to 34 GHz. The 3.5 mm connectors are also inter-mate compatible with SMA and 2.92 mm coaxial connectors.
Applications: High Speed Digital, Instrumentation, Military, Aerospace, SATCOM, Cable Assemblies and Test & measurement.
3.5 mm連接器作為標準型SMA Connector的延伸設計，通過最佳化利用空氣介質，使其能夠達到更高的使用頻率。而且以其耐用性而聞名。其設計策略著重於高度堅固的實體界面。此同軸連接器可實現高達 34 GHz 的頻率模式操作。 3.5 毫米連接器也與 SMA 和 2.92 毫米同軸連接器相互相容。
應用：高速數位、儀器、軍事、航空航太、衛星通訊、電纜組件和測試與測量。
Aec Connectors Co., Ltd.
Address : 36, Lane 63, Kai An Rd., Hoshun Ind. Park, Tainan City 709, Taiwan, R.O.C.
Telephone : +886-6-3553595(Rep.)
Fax : +886-6-3553258
Email : sales@aecconnectors.com.tw
